Page -1	Split Case Pump Data Sheet Series HS
	A.PUMP FRAME
	PUMP	Unit	2HS10	2HS13	3HS10	3HS13	3HS14	4HS11	4HS11L	4HS14	4HS14H	4HS15	4HS16	5HS12	5HS13	5HS15	5HS17	5HS19	6HS10	6HS12	6HS14	6HS15	6HS17	6HS21	6HS23	8HS12	8HS14
	1. Discharge size	mm	50	50	80	80	80	100	100	100	100	100	100	125	125	125	125	125	150	150	150	150	150	150	150	200	200
	2. Suction size	mm	65	65	100	100	100	125	125	125	125	125	125	150	150	150	150	150	150	200	200	200	200	200	200	200	250
	3. Flange rating		PN 16	PN 16	PN 16	PN 16	PN 16	PN 16	PN 16	PN 16	PN 16	PN 16	PN 16	PN 16	PN 16	PN 16	PN 16	PN 16	PN 16	PN 16	PN 16	PN 16	PN 16	PN 16	PN 16	PN 16	PN 16
	4. Casing Material		BS 1452 Gr. FG 260 as standard. Other grades depending on application.
	5. Casing Thickness	mm	8	10	9	13	12	10	10	12	12	10	15	10	10	11	12	20	14	12	13	15	14	15	22	12	15
	6. No. of stages		1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1
	7. Split Flange Gasket	mm	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5	0.5
	B. IMPELLER AND ROTOR
	1. Maxm Impeller Diameter	mm	242	325	242	335	356	275	293	350	345	380	410	300	334	360	440	490	255	300	360	372	438	530	580	300	360
	2. Weight of Impeller	Kg	25	26	7.5	18.5	21	13	13	26	26	25	26	15	22	27	38	58	14.4	19	29	20.18	32	53	75	22	32
	3. Weight of rotating Element	Kg	10	10	10	10	20	10	10	20	10	10	10	10	10	10	28	28	28	10	28	28	28	40	40	28	28
	4. Wear Ring clearence dia (max.)	mm	0.320	0.335	0.320	0.340	0.320	0.290	0.320	0.340	0.320	0.320	0.370	0.320	0.340	0.376	0.340	0.376	0.326	0.376	0.376	0.376	0.376	0.376	0.382	0.376	0.376
	Wear Ring clearence dia.(min.)	mm	0.260	0.28	0.260	0.280	0.260	0.230	0.260	0.280	0.260	0.260	0.310	0.260	0.280	0.310	0.280	0.31	0.300	0.310	0.310	0.310	0.310	0.310	0.310	0.310	0.310
	5. ID of Casing wear ring	mm	85	95	102	137	140	135	150	144	150	154	164	165	180	180	175	170	180	180	205	189	198	212	183	195	230
	6. Impeller Eye Diameter	mm	80	89	92	108	130	114	150	123	119	130	140	144	150	158	151	140	150	154	176	168	170	183	155	172	200
	7. Impeller Eye Area/ per Eye	Sq cm	23.84	35.79	40.06	53	106.3	76	150	80	85	106	128	136	150	169.5	140.5	115.5	138.2	160	204.8	183	189	201	126.5	194	276
	8. GD ^2 for Maximum Diameter	Kg.m2	0.57	1.04	0.57	1.1	1.24	0.53	0.61	0.81	0.73	1	1.53	0.81	1.10	1.90	2.60	3.56	0.59	1.2	2.4	2.00	3.1	5.9	6.0	1.6	3.4
	C. SHAFT AND BEARINGS
	SHAFT GROUP		1	1	1	1	2	1	1	2	1	1	1	1	1	1	2	2	2	1	2	2	2	3	3	2	2
	1. Shaft diameter at Impeller	mm	40	40	40	40	51	40	40	51	40	40	40	40	40	40	51	51	51	40	51	51	51	64	64	51	51
	2. Shaft diameter at coupling	mm	29	29	29	29	39	29	29	39	29	29	29	29	29	29	39	39	39	29	39	39	39	54	54	39	39
	3. Bearing Centres	mm	660	660	660	660	820	660	660	820	660	660	660	660	660	660	660	820	820	660	820	820	820	870	870	820	820
	4. 1st Critical Speed	RPM	10000	8100	10000	4040	7140	5000	5000	3530	3530	3530	3500	4650	3820	3460	3420	2770	4200	4130	3920	4700	3730	4500	3780	6204	5140
	5. Bearing size drive end		6306	6306	6306	6308	6306	6306	6306	6308	6306	6306	6306	6306	6306	6306	6308	6308	6308	6306	6308	6308	6308	6311	6311	6308	6308
	6. Bearing size non-drive end		6306	6306	6306	6308	6306	6306	6306	6308	6306	6306	6306	6306	6306	6306	6308	6308	6308	6306	6308	6308	6308	6311	6311	6308	6308
	D. STUFFING BOX
	1. Inside Diameter	mm	73	73	73	89	73	73	73	89	73	73	73	73	73	73	89	89	89	73	89	89	89	105	105	89	89
	2. Depth of Box	mm	72	72	72	80	72	72	72	80	72	72	72	72	72	72	80	80	80	72	80	80	80	112	112	80	80
	3. Size of Packing	mm Sq.	10	10	10	12	10	10	10	12	10	10	10	10	10	10	12	12	12	10	12	12	12	16	16	12	12
	4. No. of rings per Box		5	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5
	5. Sleeve Diameter at Box	mm	53	53	53	65	53	53	53	65	53	53	53	53	53	53	65	65	65	53	65	65	65	73	73	65	65
	6. Mech. Seal Size( Burgmann or eqv)	mm	35	35	35	45	35	35	35	45	35	35	35	35	35	35	45	45	45	35	45	45	45	60	60	45	45
	E. SERVICE LIMITS
	1. Maxm working pressure	Bar	16	16	16	16	16	16	16	16	16	16	16	16	16	16	16	16	16	16	16	16	16	16	20	16	16
	2. Maxm Hydrotest pressure	Bar	24	24	24	24	24	24	24	24	24	24	24	24	24	24	24	24	24	24	24	24	24	24	30	24	24
	3. Maxm Suction pressure	Bar	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5	5
	4. Maxm Temp packing	ºCelcius	80	80	80	80	80	80	80	80	80	80	80	80	80	80	80	80	80	80	80	80	80	80	80	80	80
	5. Max Temp Mech seal	ºCelcius	120	120	120	120	120	120	120	120	120	120	120	120	120	120	120	120	120	120	120	120	120	120	120	120	120
	6. Maxm Speed	RPM	1800	1800	1800	1800	1800	1800	1800	1800	1800	1800	1800	1800	1800	1800	1800	1800	1800	1800	1800	1800	1800	1800	1800	1800	1800